Download a brochure about the entire line of ULTRABOND® products.

ULTRABOND Brochure

Need to clean up after you finish up?

CRACKBOND® INDUSTRIAL CITRUS CLEANER is an ideal solvent, stripper or degreaser for most of our products. Great for removing uncured epoxies from tools and equipment, too!

INDUSTRIAL CITRUS CLEANER

ULTRABOND® ASF‑2000

Fast Curing Cold Weather Doweling Adhesive

ULTRABOND® ASF-2000 is a domestically manufactured, two-component styrene free, acrylic adhesive used for anchoring and doweling applications in uncracked concrete with threaded rod and rebar. It is suitable for use in temperatures between 5 °F and 110 °F (-15 °C to 43 °C ). Available in a 28 oz. cartridge.

ULTRABOND® ASF-2000 meets the following designations per ASTM C881/AASHTO M235:
Grade 3 | Class A | Type I, II, IV, V
Grade 3 | Class B | Type I, II, IV, V
Grade 3 | Class C | Type I, II, IV, V

Browse our selection of anchoring and doweling adhesives for vertical construction and transportation infrastructure. Learn more about cold weather epoxy and more with Adhesives Technology Corporation.

Request more information about ULTRABOND® ASF-2000 or learn how to buy.

  • Ultra-fast 30 minute full cure time at 75 °F (24 °C) in dry concrete

  • Cures down to 5 °F (-15 °C) – see Table 5
  • Fast mortar repair for panels and other concrete surfaces
  • High bond strength with fast cure times
  • Easily dispensable even at low temperatures
  • Made in the USA
  • Styrene free
  • Non-sag
  • Low odor
  • Can be installed down to 5 °F (-9 °C)
  • Moisture insensitive
  • Meets the following designations per ASTM C881/AASHTO M235:
    Grade 3 | Class A | Type I, II, IV, V
    Grade 3 | Class B | Type I, II, IV, V
    Grade 3 | Class C | Type I, II, IV, V
  • Non-sag consistency
  • 18 month shelf life
Size Part No. Qty
28 fl. oz. crtg A28-ASF2000 8

View Gallery of Available Packaging

Part No. Description
TM28HD 28 oz. Manual Dispensing Tool
TB28HD-A 28 oz. Battery Dispensing Tool
TA28HD-A 28 oz. Pneumatic Dispensing Tool
T12 Nozzle for 28 oz. Cartridge
T12-3PK Nozzle for 28 oz. Cartridge
BR-EXT Brush Extension For All Sizes
BR-SDS SDS Brush Adaptor For All Sizes
TUBE916-EXT Nozzle Extension Tubing For All Sizes
B716 Wire Brush (7/16″ Dia Drill Bit)
B916 Wire Brush (9/16″ Dia Drill Bit)
B34 Wire Brush (3/4″ Dia Drill Bit)
B78 Wire Brush (7/8″ Dia Drill Bit)
B100 Wire Brush (1″ Dia Drill Bit)
B118 Wire Brush (1 1/8″ Dia Drill Bit)

View Gallery of Dispensing Tools and Accessories

Downloads

Dispensing Tools & Accessories

Available Packaging