Adhesive News

TEXAS DOT APPROVAL

2019-07-29T13:51:35-04:00

Adhesives Technology Corp (ATC) is proud to announce a DOT approval. TXDOT has tested and approved CRACKBOND LR-321 in both cartridges (tubes) and in bulk packaging under:

TXDOT Department Material Specification – DMS 6100 EPOXIES and ADHESIVES, Type IX Epoxy for Crack Injection

The approval will be listed on their TXDOT Material Producer List (MPL) on their next update at the following link:

http://ftp.dot.state.tx.us/pub/txdot-info/cmd/mpl/epxyadh.pdf

This makes a total of 12 approvals in Texas!

Texas   ULTRABOND HS-1CC
Texas   ULTRABOND 365CC
Texas   ULTRABOND 1
Texas   ULTRABOND HS-200
Texas   ULTRABOND 2
Texas   ULTRABOND 1300
Texas   CRACKBOND 2100 MV
Texas   ULTRABOND 2300
Texas   CRACKBOND LR-321
Texas   CRACKBOND EPOXY REPAIR PASTE
Texas   CRACKBOND HEALER/SEALER
Texas   CRACKBOND JET PATCH

This makes a total of 21 CRACKBOND LR-321 approvals across the USA!

Alabama   CRACKBOND LR-321
Arizona   CRACKBOND LR-321
Florida   CRACKBOND LR-321
Georgia   CRACKBOND LR-321
Idaho   CRACKBOND LR-321
Indiana   CRACKBOND LR-321
Iowa   CRACKBOND LR-321
Kansas   CRACKBOND LR-321
Kentucky   CRACKBOND LR-321
Michigan   CRACKBOND LR-321
Minnesota   CRACKBOND LR-321
Nebraska   CRACKBOND LR-321
New Jersey   CRACKBOND LR-321
Ohio   CRACKBOND LR-321
Oklahoma   CRACKBOND LR-321
Oregon   CRACKBOND LR-321
Pennsylvania   CRACKBOND LR-321
Tennessee   CRACKBOND LR-321
Texas   CRACKBOND LR-321
Virginia   CRACKBOND LR-321
Washington   CRACKBOND LR-321

Please contact us if you have questions regarding this approval

TEXAS DOT APPROVAL2019-07-29T13:51:35-04:00

DOT APPROVAL FOR HS-1CC IN MASSACHUSSETS

2019-07-29T11:31:41-04:00

Adhesives Technology Corp (ATC) is proud to announce a DOT approval for ULTRABOND HS-1CC under the following MassDOT specification:

MassDOT Standard Specifications for Highway and Bridges – Adhesive Anchors

They have already listed the ULTRABOND HS-1CC approval on their QCML which may be found at:

https://www.mass.gov/service-details/adhesive-anchors#

This makes a total of 2 approvals on MassDOT!

Massachusetts ULTABOND HS-1CC
Massachusetts ULTRABOND ASF-1000

This totals 31 approvals for ULTRABOND HS-1CC across the USA!!

Alabama ULTRABOND HS-1CC
Alaska ULTRABOND HS-1CC
Arizona ULTRABOND HS-1CC
Arkansas ULTRABOND HS-1CC
Florida ULTRABOND HS-1CC
Georgia ULTRABOND HS-1CC
Idaho ULTRABOND HS-1CC
Indiana ULTRABOND HS-1CC
Iowa ULTRABOND HS-1CC
Kansas ULTRABOND HS-1CC
Kentucky ULTRABOND HS-1CC
Louisiana ULTRABOND HS-1CC
Maine ULTRABOND HS-1CC
Maryland ULTRABOND HS-1CC
Massachusetts ULTRABOND HS-1CC
Minnesota ULTRABOND HS-1CC
Mississippi ULTRABOND HS-1CC
Nebraska ULTRABOND HS-1CC
Nevada ULTRABOND HS-1CC
New Jersey ULTRABOND HS-1CC
New Mexico ULTRABOND HS-1CC
North Carolina ULTRABOND HS-1CC
Ohio ULTRABOND HS-1CC
Oklahma ULTRABOND HS-1CC
Oregon ULTRABOND HS-1CC
Pennsylvania ULTRABOND HS-1CC
Rhode Island ULTRABOND HS-1CC
Tennessee ULTRABOND HS-1CC
Texas ULTRABOND HS-1CC
Utah ULTRABOND HS-1CC
Virginia ULTRABOND HS-1CC

This approval will be updated to our website under the DOT Listings for Massachusetts.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this approval.

DOT APPROVAL FOR HS-1CC IN MASSACHUSSETS2019-07-29T11:31:41-04:00

Missouri DOT Approval for CRACKBOND HEALER/SEALER!!!

2019-06-03T12:15:12-04:00

Adhesives Technology Corp. (ATC) is proud to announce another outstanding DOT approval. Missouri DOT has approved our CRACKBOND HEALER/SEALER for use on Missouri DOT projects under:

MoDOT Standard Specifications for Highway Construction – Qualified List TYPE III EPOXY, FS-1039 TABLE 2

We have the attached approval letter and the official approval will be posted on their Qualified Products List on their next scheduled update, which may be found at:

https://www.modot.org/sites/default/files/documents/TABLES%5B1%5D.pdf

This makes a total of 4 approvals for ATC on Missouri DOT!

Missouri ULTABOND 1300
Missouri ULTRABOND ASF-1000
Missouri CRACKBOND 2100 MV
Missouri CRACKBOND HEALER/SEALER

This totals 6 CRACKBOND HEALER/SEALER approvals across the USA!!

Missouri CRACKBOND HEALER/SEALER
Nevada CRACKBOND HEALER/SEALER
Oregon CRACKBOND HEALER/SEALER
Tennessee CRACKBOND HEALER/SEALER
Texas CRACKBOND HEALER/SEALER
Virginia CRACKBOND HEALER/SEALER

This approval will be posted to our website under the DOT Listings for Missouri.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this approval.

Missouri DOT Approval for CRACKBOND HEALER/SEALER!!!2019-06-03T12:15:12-04:00

First Ever IBC Compliant Anchoring Epoxy for Bridges and Structures

2019-06-03T12:14:12-04:00

Lake Pontchartrain Causeway, Image Courtesy Navin75 via Flickr.comThe Lake Pontchartrain Causeway, recognized by the Guinness Book of World Records as the longest continuous bridge passing over water, is undergoing a massive, $100MM safety improvement project.  A major portion of this project involves adding taller guard rails along the southbound span of the 23 mile structure, and ULTRABOND HS-1CC, manufactured by Adhesives Technology Corporation, was specified as the structural anchoring adhesive.  A full-page article outlining the need for bridge repair throughout North America, and ATC’s commitment to providing a code compliant, MADE IN USA anchoring product was featured in the May issue of Structure Magazine.

 

Click Here to download a PDF copy of that article, and please contact us if you’d like more information on this project, ULTRABOND HS-1CC, or any of our other quality domestically-manufactured adhesives. 

First Ever IBC Compliant Anchoring Epoxy for Bridges and Structures2019-06-03T12:14:12-04:00

Announcing Tennessee DOT Approval for CRACKBOND HEALER/SEALER!!!

2019-06-03T12:17:02-04:00

Adhesives Technology Corp. is proud to announce another ATC DOT approval! Tennessee DOT has approved our CRACKBOND HEALER/SEALER for use on Tennessee DOT projects under:

TNDOT 2015 Standard Specifications for Road and Bridge Construction – LIST 8 Epoxy Resin Systems TYPES I, II, IV & V GRADE 1 CLASS B & C (PE-19002)

They sent the attached approval letter and the approval will be posted on their Qualified Approvals List on their next scheduled update, which may be found at:

https://www.tn.gov/content/dam/tn/tdot/hq-materials-tests/qpl/QPL%208.pdf

This makes a total of 10 approvals for ATC on Tennessee DOT!

Tennessee          ULTRABOND HS-1CC

Tennessee          ULTRABOND 1

Tennessee          ULTRABOND HS-200

Tennessee          ULTRABOND 1300

Tennessee          CRACKBOND 2100 MV

Tennessee          ULTRABOND 2300

Tennessee          CRACKBOND LR-321

Tennessee          CRACKBOND LR-321G

Tennessee          CRACKBOND SLV-302

Tennessee          CRACKBOND HEALER/SEALER

This totals 5 CRACKBOND HEALER/SEALER approvals across the USA!!

Nevada               CRACKBOND HEALER/SEALER

Oregon                CRACKBOND HEALER/SEALER

Tennessee          CRACKBOND HEALER/SEALER

Texas                   CRACKBOND HEALER/SEALER

Virginia               CRACKBOND HEALER/SEALER

This approval will be updated to our website under the DOT Listings for Tennessee.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this approval.

Announcing Tennessee DOT Approval for CRACKBOND HEALER/SEALER!!!2019-06-03T12:17:02-04:00

Announcing…Alabama DOT Approval for ULTRABOND HS-1CC!!!

2019-06-03T12:19:12-04:00

Adhesives Technology Corp. is proud to announce that we have received another ATC DOT approval! Alabama DOT has approved our ULTRABOND HS-1CC for use on Alabama DOT projects under:

ALDOT 2018 Standard Specifications for Construction – LIST II – 15 Concrete Anchoring Systems

They have sent the attached approval letter and it will be posted on their Qualified Products List (QPL) on their next scheduled update, which may be found at:

https://www.dot.state.al.us/mtweb/Testing/MSDSAR/pdf/QMSD/Lii15.pdf

This makes a total of 6 approvals for ATC on Alabama DOT!

Alabama              ULTRABOND HS-1CC

Alabama              ULTRABOND ACRYL-8CC

Alabama              ULTRABOND HS-200

Alabama              ULTRABOND 1300

Alabama              CRACKBOND 2100 MV

Alabama              CRACKBOND LR-321

This totals 30 ULTRABOND HS-1CC approvals across the USA!!

Alabama              ULTRABOND HS-1CC

Alaska                   ULTRABOND HS-1CC

Arizona                 ULTRABOND HS-1CC

Arkansas              ULTRABOND HS-1CC

Florida                  ULTRABOND HS-1CC

Georgia                 ULTRABOND HS-1CC

Idaho                    ULTRABOND HS-1CC

Indiana                 ULTRABOND HS-1CC

Iowa                      ULTRABOND HS-1CC

Kansas                  ULTRABOND HS-1CC

Kentucky              ULTRABOND HS-1CC

Louisiana             ULTRABOND HS-1CC

Maine                   ULTRABOND HS-1CC

Maryland             ULTRABOND HS-1CC

Minnesota           ULTRABOND HS-1CC

Mississippi          ULTRABOND HS-1CC

Nebraska             ULTRABOND HS-1CC

Nevada                ULTRABOND HS-1CC

New Jersey         ULTRABOND HS-1CC

New Mexico        ULTRABOND HS-1CC

North Carolina   ULTRABOND HS-1CC

Ohio                     ULTRABOND HS-1CC

Oklahoma           ULTRABOND HS-1CC

Oregon                ULTRABOND HS-1CC

Pennsylvania     ULTRABOND HS-1CC

Rhode Island     ULTRABOND HS-1CC

Tennessee          ULTRABOND HS-1CC

Texas                   ULTRABOND HS-1CC

Utah                    ULTRABOND HS-1CC

Virginia              ULTRABOND HS-1CC

This approval will be updated to our website under the DOT Listings for Alabama.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this approval.

Announcing…Alabama DOT Approval for ULTRABOND HS-1CC!!!2019-06-03T12:19:12-04:00

Alabama DOT Approval for ULTRABOND ACRYL-8CC

2019-06-03T12:18:26-04:00

Adhesive Technology Corp. is proud to announce another ATC DOT approval! Alabama DOT has approved our ULTRABOND ACRYL-8CC for use on Alabama DOT projects under:

ALDOT 2018 Standard Specifications for Construction – LIST II – 15 Concrete Anchoring Systems

They have sent the attached approval letter and it will be posted on their Qualified Products List (QPL) on their next scheduled update, which may be found at:

https://www.dot.state.al.us/mtweb/Testing/MSDSAR/pdf/QMSD/Lii15.pdf

This makes a total of 5 approvals for ATC on Alabama DOT!

Alabama       ULTRABOND ACRYL-8CC
Alabama       ULTRABOND HS-200
Alabama       ULTRABOND 1300
Alabama       CRACKBOND 2100 MV
Alabama       CRACKBOND LR-321

This totals 5 ULTRABOND ACRYL-8CC approvals across the USA!!

Alabama       ULTRABOND ACRYL-8CC
Illinois          ULTRABOND ACRYL-8CC
Iowa              ULTRABOND ACRYL-8CC
New Jersey  ULTRABOND ACRYL-8CC
Ohio              ULTRABOND ACRYL-8CC

This approval will be updated to our website under the DOT Listings for Alabama.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this approval.

Alabama DOT Approval for ULTRABOND ACRYL-8CC2019-06-03T12:18:26-04:00

Ohio DOT Approval for ULTRABOND ACRYL-8CC!!!!!

2019-06-03T12:22:06-04:00

Adhesives Technology is proud to announce the DOT approval for ULTRABOND ACRYL-8CC for use on OHIO DOT projects under:

ODOT Construction and Materials Specifications 705.20 – Non-Shrink, Non-Metallic Materials

They have already listed the approval on their Qualified Products List (QPL) which may be found @:

http://www.odotonline.org/materialsmanagement/qpl.asp?specref=705.20(08)

This makes a total of 6 approvals for ATC on Ohio DOT!

Ohio              ULTRABOND HS-1CC

Ohio              ULTRABOND 365CC

Ohio              ULTRABOND ACRYL-8CC

Ohio              ULTRABOND 1300

Ohio              CRACKBOND LR-321

Ohio              CRACKBOND SLV-302

This makes a grand total of 4 ULTRABOND ACRYL-8CC approvals across the USA!!

Illinois          ULTRABOND ACRYL-8CC

Iowa              ULTRABOND ACRYL-8CC

New Jersey  ULTRABOND ACRYL-8CC

Ohio              ULTRABOND ACRYL-8CC

This approval will be updated to our website under the DOT Listings for Ohio.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this new approval.

Ohio DOT Approval for ULTRABOND ACRYL-8CC!!!!!2019-06-03T12:22:06-04:00

ATC DOT Approval NOW totaling 217!!!!!

2019-06-03T12:16:21-04:00

Adhesive Technology Corp. is proud to announce another outstanding ATC DOT approval over ten months in the works!

NMDOT Standard Specification for Highway and Bridge Construction section – 522.2.1 Chemical Adhesive Anchor Devices

They will list the approval on their Approved Products List (APL) on their next update at the following link:

http://dot.state.nm.us/content/dam/nmdot/APL/APL.pdf

This makes a total of 5 approvals for ATC on NMDOT!

New Mexico   ULTRABOND HS-1CC
New Mexico   ULTRABOND 365CC
New Mexico   ULTRABOND HS-200
New Mexico   ULTRABOND 1300
New Mexico   CRACKBOND EPOXY REPAIR PASTE

This makes a grand total of 28 ULTRABOND HS-1CC approvals across the USA!!

Alaska      ULTRABOND HS-1CC
Arizona   ULTRABOND HS-1CC
Arkansas   ULTRABOND HS-1CC
Colorado   ULTRABOND HS-1CC
Florida   ULTRABOND HS-1CC
Georgia   ULTRABOND HS-1CC
Idaho   ULTRABOND HS-1CC
Indiana   ULTRABOND HS-1CC
Iowa   ULTRABOND HS-1CC
Kansas   ULTRABOND HS-1CC
Kentucky   ULTRABOND HS-1CC
Louisiana   ULTRABOND HS-1CC
Maine   ULTRABOND HS-1CC
Maryland   ULTRABOND HS-1CC
Minnesota   ULTRABOND HS-1CC
Mississippi   ULTRABOND HS-1CC
Nebraska   ULTRABOND HS-1CC
Nevada   ULTRABOND HS-1CC
New Jersey   ULTRABOND HS-1CC
New Mexico   ULTRABOND HS-1CC
Ohio   ULTRABOND HS-1CC
Oklahoma   ULTRABOND HS-1CC
Pennsylvania   ULTRABOND HS-1CC
Rhode Island   ULTRABOND HS-1CC
Tennessee   ULTRABOND HS-1CC
Texas   ULTRABOND HS-1CC
Utah   ULTRABOND HS-1CC
Virginia   ULTRABOND HS-1CC

Recall these are the 10 states that do not currently maintain approval listings for adhesive type products.

Delaware*
Hawaii*
Montana*
New Hampshire*
North Dakota*
South Carolina*
South Dakota*
Vermont*
West Virginia*
Wyoming*

This approval will be updated to our website under the DOT Listings for New Mexico.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this new approval.

ATC DOT Approval NOW totaling 217!!!!!2019-06-03T12:16:21-04:00

Announcing….TXDOT MPL 2019 RECERTIFICATION

2019-03-25T12:55:10-04:00

Adhesives Technology is happy to announce it has passed the 2019 recertification for ALL ATC products listed on TXDOT Material Producer List (MPL) DMS 6100 Epoxies and Adhesives. See attached link:

DMS 6110 – Epoxies and Adhesives
http://ftp.dot.state.tx.us/pub/txdot-info/cmd/mpl/epxyadh.pdf

The recently approved JET PATCH is listed on a different MPL – DMS 4655 Concrete Repair Materials (neat and extended) and does not require recertification until requested by TXDOT. Note: a notarized letter has been sent to request the JET PATCH brand name from HARD ROK to CRACKBOND JET PATCH and they will change it on their next update.

DMS 4655 – Concrete Repair Materials
http://ftp.dot.state.tx.us/pub/txdot-info/cmd/mpl/concrepair.pdf

The 2019 recertification includes a total of 19 different approved TYPES/CLASSES for ATC and our private label customer, CMC. These recertification are approved for use on TXDOT projects through December 2019.

TXDOT
Type & Class
Product Name
Type III Class C CRACKBOND EPOXY REPAIR PASTE Cartridge ATC
Type III Class C CRACKBOND EPOXY REPAIR PASTE Bulk ATC
Type III Class C UB 1300 Cartridge ATC
Type III Class C UB 1300 Bulk ATC
Type III Class C UB 1 Cartridge ATC
Type III Class C UB HS-200 Cartridge ATC
Type III Class C UB 2300 Bulk ATC
Type III Class C UB HS-1CC Cartridge ATC
Type III Class C UB HS-1CC Bulk ATC
Type III Class D UB 365CC Cartridge ATC
Type III Class F UB 365CC Cartridge ATC
Type IV CRACKBOND HEALER/SEALER Bulk ATC
Type V CB 2100 MV Bulk ATC
Type VIII Class B CB 2100 MV Bulk ATC
Type IX CRACKBOND HEALER/SEALER Bulk ATC

Please let your customers know of the ATC TXDOT MPL Recertification through 2019.

Please email Renee Thomas at rthomas@atcepoxy.com directly if you have any questions regarding this new approval.

Announcing….TXDOT MPL 2019 RECERTIFICATION2019-03-25T12:55:10-04:00